top of page
Search

Aspirating Smoke Detector: VESDA vs SECURITON

Fire Disasters can ruin lives and destroy businesses, not only because of property loss but also the time it takes to re-establish everything. Highly sensitive equipment, machinery, and data can be easily damaged in a fire disaster and cannot be recovered easily. Artefacts in the museum and data stored in labs, cannot be compromised at any cost. To protect the valuables and essentials from hazards, early detection becomes necessary. As it minimizes fire damage, sometimes early detection can also prevent fire accidents.

Aspirating Smoke Detectors can help you with that. Aspirating smoke detectors, also known as air-sampling smoke detectors, are advanced fire detection systems that use a network of pipes and sensors to continuously monitor the air quality for the presence of smoke particles. The system works by drawing in air from the protected area and passing it through a series of filters that capture any smoke particles present. The smoke particles are then detected by a sensitive laser or infrared sensor, which triggers an alarm to alert occupants and initiate the fire suppression system.


VESDA vs SECURITON



Aspirating smoke detectors are a critical component of any fire safety system, providing early detection of smoke and other airborne particles before they become visible to the naked eye. VESDA and Securiton are two popular brands of aspirating smoke detectors, each with its unique features and advantages. In this blog, we will provide a short overview of VESDA and Securiton aspirating smoke detectors, outlining the differences between the two systems and helping you determine which one is best suited for your specific fire detection needs. Whether you're looking to protect a large warehouse, data center, or small office, understanding the differences between VESDA and Securiton can help you make an informed decision about your fire safety system.


VESDA Aspirating Smoke Detector

VESDA aspirating smoke detection solutions are designed to provide the earliest possible warning of a fire hazard through continuous air sampling. These detectors can detect smoke particles at extremely early stages, buying critical time for occupants to evacuate the building and for the fire suppression system to be activated. VESDA systems offer multi-level warnings and a wide range of sensitivity, ensuring that even minute levels of smoke can be detected before a fire has the chance to escalate.



One of the key advantages of VESDA systems is their consistent performance over time. The sensitivity of the detectors does not degrade or change over time, ensuring that the system remains effective and reliable. Additionally, VESDA systems are manufactured to the highest standards, using targeted Six Sigma techniques and ISO 9000 standards, and have been certified by regulatory bodies worldwide.


Technology & how it works

VESDA (Very Early Smoke Detection Apparatus) aspirating smoke detectors use advanced air sampling technology to detect smoke particles in the air. Here is a brief overview of how the technology works:


· Air sampling: VESDA systems use a network of pipes and sampling points to continuously draw in air from the protected area. The air is then passed through a series of filters to remove any particulate matter, such as dust or pollen.



· Laser detection: The filtered air is then passed through a laser detection chamber where it is analyzed for the presence of smoke particles. VESDA detectors use a laser-based light scatter technology to detect smoke particles at very early stages, even before they are visible to the naked eye.


· Sensitivity and alarms: VESDA detectors are highly sensitive and can detect smoke particles at very low concentrations. They are designed to provide both early warning and advanced warning of a potential fire hazard. The system has multiple alarm thresholds, allowing for different levels of warning to be issued depending on the severity of the smoke concentration.


· Alert and notification: When smoke particles are detected, the VESDA system will issue an alarm, alerting building occupants and/or the fire suppression system. The system can also be connected to a building management system, allowing for remote monitoring and notification.


SECURITON Aspirating Smoke Detector

Securiton aspirating smoke detectors are a line of highly sensitive smoke detection systems that use advanced air sampling and multiple detection technologies to provide reliable fire detection capabilities. Manufactured by Securiton AG, a Swiss-based company specializing in fire detection and alarm systems, Securiton aspirating smoke detectors are designed to provide early warning of a potential fire hazard and can be customized to meet the specific needs of the building or facility. Like other fire safety equipment aspirating smoke detectors, Securiton systems require regular maintenance and testing to ensure reliable performance.



Technology & How it works

Securiton aspirating smoke detectors use a combination of air sampling and multiple detection technologies to provide reliable smoke detection capabilities. Here is an overview of the Securiton aspirating smoke detector technology:

· Air sampling: Securiton aspirating smoke detectors use a network of pipes and sampling points to continuously draw in air from the protected area. The air is then passed through a series of filters to remove any particulate matter, such as dust or pollen.

· Detector unit: The filtered air is then passed through the detector unit, which is equipped with multiple detection technologies, including a highly sensitive photoelectric detector and an infrared sensor.

· Sensitivity and alarms: Securiton detectors are highly sensitive and can detect smoke particles at very low concentrations. The system has multiple alarm thresholds, allowing for different levels of warning to be issued depending on the severity of the smoke concentration.

· Alert and notification: When smoke particles are detected, the Securiton system will issue an alarm, alerting building occupants and/or the fire suppression system. The system can also be connected to a building management system, allowing for remote monitoring and notification.



Advantages and Disadvantages of VESDA Aspirating Smoke Detector


Advantages:

1. Early warning: VESDA systems provide early warning of potential fires, allowing building occupants to evacuate and fire suppression systems to activate before the fire can escalate.

2. Highly sensitive: VESDA systems are highly sensitive and can detect smoke particles at very low concentrations, providing reliable smoke detection capabilities.

3. Wide sensitivity range: VESDA systems have a wide range of sensitivity settings that can be customized to meet the specific needs of the building or facility.

4. Multi-level warnings: VESDA systems have multiple alarm thresholds, providing different levels of warning depending on the severity of the smoke concentration.

5. Remote monitoring: VESDA systems can be connected to building management systems, allowing for remote monitoring and notification.


Disadvantages:

1. Cost: VESDA systems can be expensive compared to other types of smoke detection systems.

2. Maintenance: VESDA systems require regular maintenance and testing to ensure reliable performance, which can be time-consuming and expensive.

3. False alarms: VESDA systems can be susceptible to false alarms if not properly installed and maintained.

4. Installation: The installation of VESDA systems can be complex and require specialized expertise.


Advantages and Disadvantages of SECURITON Aspirating Smoke Detector


Advantages

1. Highly sensitive: Securiton systems are highly sensitive and can detect smoke particles at very low concentrations, providing reliable smoke detection capabilities.

2. Multi-level warnings: Securiton systems have multiple alarm thresholds, providing different levels of warning depending on the severity of the smoke concentration.

3. Remote monitoring: Securiton systems can be connected to building management systems, allowing for remote monitoring and notification.

4. Flexible design: Securiton systems are designed to be highly flexible and can be customized to meet the specific needs of the building or facility.

5. Low maintenance: Securiton systems require less maintenance than other types of smoke detection systems, which can save time and money.


Disadvantages

1. Cost: Securiton systems can be expensive compared to other types of smoke detection systems.

2. False alarms: Securiton systems can be susceptible to false alarms if not properly installed and maintained.

3. Installation: The installation of Securiton systems can be complex and require specialized expertise.

4. Limited range: The range of Securiton systems can be limited in larger facilities or buildings, requiring multiple units to be installed.


Choose Securiton, Choose NOTOFIRE



If you're looking for a top-quality smoke detection system that offers reliable, accurate performance, look no further than the Securiton Aspirating Smoke Detector, available exclusively through NOTOFIRE. Our team of experts can help you design and install a customized system that meets the specific needs of your facility, with flexible design options and cutting-edge technology that ensures early detection of potential fire hazards. And with remote monitoring capabilities and multi-level warnings, you can rest easy knowing that you'll always have the information you need to keep your facility safe and secure. Don't settle for second-best when it comes to fire protection – choose the Securiton Aspirating Smoke Detector by NOTOFIRE and get the best of the best. Contact us today to learn more about our smoke detection solutions and how we can help you protect your facility.


67 views0 comments

Comentarios


bottom of page